Miller Full-Body Non-Stretch Harness Back & Side D-Rings

High-altitude work sometimes means workers need to be suspended. Ensure stability with the 850-7/UYK full-body non-stretch harness with back & side D-rings from Miller. The added feature of the 2 side mounted D-rings creates mounting points to secure two-leg straps so the wearer won't find themselves spinning out of control while focusing on detail work. The bright yellow harness straps are made from a strong 1 ¾" bonded polyester webbing with friction buckle shoulder straps. The mating buckle chest strap and adjustable waist belt with tongue-buckled leg straps ensure a comfortable fit that is adjustable to suit most people. The harness, rated to support 400 lbs, comes standard with a 6' shock-absorbing lanyard and a woven inner core surrounded by a tubular sheath. One end is fitted with a locking snap hook to secure onto the harness back D-ring, while the other has a rebar hook to connect to a variety of steel structures. The lanyard extends from 3 ½ ft to 6 ft, creating a cushioning effect in the event of a fall.

• Non-stretch harness with shock-absorbing lanyard
• Universal size
• Harness:
  • High-quality 1 ¾" polyester webbing
  • Shoulder straps: friction buckle for adjustment: 4,000 lbs (18kN)
  • Chest strap: mating buckle
  • Adjustable waist belt
  • Leg strap: tongue buckle: 4,000 lbs (18kN)
  • Rated to 400lbs (181.4kg)
  • Sliding back D ring for safety line connection: 5,000 lbs (22kN)
  • Side D-rings
  • Pull free lanyard rings
  • Brass grommets
• Shock-absorbing lanyard:
  • Retracts from 6' to 3 ½'
  • Tubular design
  • Woven core for smooth extension
  • Outer sheath for added strength
  • Harness clip: locking snap hook
  • Base clip: rebar hook
• All hardware meets ASTM (50) fifty-hour salt spray test
• Meets ANSI A10.32, Z359.1; OSHA 1910.66, 1926.502(d); CSA Z259.10-06 standards
• For use on:
  • Construction
  • Utilities
  • Bridges
  • Projects at altitude